Vol. 4 No. 1 (2025)

Articles

• Quantification of Bioethanol Derived from Selected Renewable Coconut Raw Materials Using Simple Fermentation-Distillation Process

  Dharell Siano, Martina Victoria Pascua, Edessa Flordeliz, Mary Jane C. Fetalvero

  1-8

  • FULL ARTICLE

• Effect of Alkaline Treatment on Tensile Properties of Low Density Polyethylene/Bean Sprout Skin Composites

  Soo Jin Tan, Kai Loong Foo, Mohammad Firdaus bin Abu Hashim

  9-14

  • FULL ARTICLE

• Enhanced Electrical Properties of Graphite-Doped Titanium Dioxide Thin Films via Sol-Gel Method

  Kai Loong Foo, S.J. Tan, C.Y. Heah, Y.M. Liew

  15-21

  • FULL ARTICLE

• Engineering a Better Slice: Development of an Efficient Watermelon Slicing Tool

  Mohd Uzair Mohd Rosli, M.S. Zakaria, Masniezam Ahmad, Lim Jit Chao, Ng Chung Kit, Phong Jun Yuan

  22-32

  • FULL ARTICLE

• Design and Development of a Spring-Type Fixture for Manufacturing Efficiency

  Mohd Uzair Mohd Rosli, M.S. Zakaria, Masniezam Ahmad, Muhammad Syafiq Bin Bahanuddin, Muhammad Aidan Hakim Bin Mohd Nasir, Wan Ahmad Nayeef Bin Wan Zamri

  33-42

  • FULL ARTICLE

• Enhancing Quality Control in Automotive Reconditioning: A Case Study of Carsome Certified Lab

  Muhammad Naufal Aqil Bin Daud, Suhaimi Shahrin, Muhammad Aiman Bin Ahmad Fozi, Muhammad Lutfi Bin Abd. Latif

  43-51

  • FULL ARTICLE

• Strategic Workflow Optimization in Automotive Quality Control: A Case Study of Carsome Certified Lab

  Mohammad Adli Nazmi Bin Samsu Bahari, Suhaimi Shahrin, Asmawi Mohd Khailani, Wan Mohd Faizal

  52-60

  • FULL ARTICLE

• Design and Development of Single-Handed Kitchenware for Individuals with Hand Disabilities

  Muhammad Ikman Ishak, Muhamad Ikhmal Alif Abdullah, Ahmad Ramli Rashidi, Shahidah Arina Shamsuddin, Normah Kassim, Wan Nur Atiqah Wan Draman, Noor Diyana Dahlan

  61-74

  • FULL ARTICLE

• Building Stronger Biomass: How Particle Size Affects the Physical and Mechanical Properties of Khaya senegalensis Fuel Pellets

  Ras Izzati Ismail, Chu Yee Khor, Alina Rahayu Mohamed

  75-83

  • FULL ARTICLE

• Determining the Potential of Layered Banana Fibre Weave Patterns for Enhanced Blast Resistance in Bomb Blankets

  Abdul Rashid Othman, Ahmad Humaizi Hilmi, Asna Rasyidah Abdul Hamid, Siti Aisyah Azman

  84-96

  • FULL ARTICLE

• Multi-Objective Optimization of Injection-Molded Car Door Handles Using Taguchi Method and Grey Relational Analysis

  Wan Alif Nazmi Wan Muhamat, Nik Mizamzul Mehat, Shahrul Kamaruddin

  97-112

  • FULL ARTICLE

• Effect of Cutting Parameters on Cutting-Edge Quality in Laser Machining of Various Metals

  Z. Zakwan, S. Norbahiyah

  113-123

  • FULL ARTICLE

• Investigation of Machinability in Milling of PTFE under Dry and Wet Conditions

  Mohamad Akmal Alif Bin Ismail, Muhammad Syamil Zakaria, Mohd Uzair Mohd Rosli, Masniezam Ahmad

  124-133

  • FULL ARTICLE

• A Parametric Study on The Performance of Latent Heat Thermal Energy Storage

  Muhammad Haziq Akmal bin Mohd Ridzuan, Mohamad Syafiq A.K, Adel Nasser, M. Ahmad, Mohd Haidezul Jamal bin Ab Hadi, M.N. Misbah, A.S. Abdull Sukor

  134-151

  • FULL ARTICLE

• Improving Work Quality in Painting Between Wall and Ceiling Areas Using a Paint Edger

  Wan Nur A’tiqah Wan Draman, Muhammad Amir Anur Hussien, Mohd Sabri Hussin, Mohd Syedi Imran Mohd Dawi, Normah Kassim, Muhammad Ikman Ishak

  152-159

  • FULL ARTICLE

• Synergistic Effects of Biochar, Urea Fertilizer, and Lactic Acid Bacteria on Mitigating Soil Ammonia Volatilization

  Siti Nurain binti Nizam, Lee Yit Leng, Siti Nurain binti Nizam, Norawanis Abdul Razak, Nur Lailina Makhtar, Ras Izzati Ismail

  160-166

  • FULL ARTICLE

• Critical Spare Parts Identification and Management of Mechanical Ventilation and Air-Conditioning (MVAC) System in University Campus

  Syazatul Nazirah Saroji, Mohd Syafiq Syazwan Mustafa, Nurul Hidayah Roslan, Hilmi Kosnin, Hamzah Harjono, Syamil Ismail, Anuar Pawan

  167-181

  • FULL ARTICLE

• Innovative Design of Knife Sharpener for Improving Sharpening Capabilities

  Muhammad Syahmi Akmal Zaini, Siti Maisarah Azami, Mohamed Rafiq Asyraf Rozali

  182-194

  • FULL ARTICLE

• Exploring the Evolution of Artificial Bee Colony Algorithms: Emphasis on Semi-Greedy Strategies

  MFMA Hamzas, H Radhwan

  195-202

  • FULL ARTICLE

• Design and Fabrication of Jig and Fixture for Panel Pin Assembly in Power Motor Side Mirror

  Vinoth Baskaran, H Radhwan, MFMA Hamzas

  203-212

  • FULL ARTICLE

• Balancing the Popcorn Production Line Using Tecnomatix Plant Simulation

  M A Selimin, A N A Ahmad, M S Nazri

  213-223

  • FULL ARTICLE

• Knowledge, Behavior, Awareness, and Policy Towards E-Waste Management Performance Among Malaysian SMEs

  Mohd Akhir Ahmad, Muhd Hakimi Razak, Rosman Iteng

  224-234

  • FULL ARTICLE

• The Role of Trust and The Digital Divide: A Moderated Mediation Model for Sustainable E-Government

  Nur Ajrun Khalid, Yu Yang

  235-249

  • FULL ARTICLE

• How Do Milk Farmers’ Demographics Affect Their Knowledge of Food Loss in the Milk Supply Chain

  Fauzan Romadlon, Wan Nurul Karimah Wan Ahmad, Alina Shamsuddin

  250-261

  • FULL ARTICLE

• Conceptual Framework for Supply Chain Management Strategies and Aviation Ground Maintenance Operations Sustainability: Mediation Role of Supply Chain Management Capabilities

  Qusai Makki Ali Ibrahim, Mohammed Akhir Bin Haj Ahmed, Rosini Binti Nawang Mustapen

  262-272

  • FULL ARTICLE

• Marine Parks and Sustainability of Fisheries Resources: View of the Pulau Tioman’s Residents

  Rahimi Abidin, Nor Hasni Osman, Fadhilah Mohd Zahari, Alminnourliza Noordin, Suhaila Abdul Hanan, Mohd Nizam Ismail

  273-284

  • FULL ARTICLE