Building Stronger Biomass: How Particle Size Affects the Physical and Mechanical Properties of Khaya senegalensis Fuel Pellets
DOI:
https://doi.org/10.58915/aset.v4i1.1818Abstract
Biomass has gained significant attention as a renewable energy source due to its potential to reduce dependency on fossil fuels and lower carbon emissions. Among various biomass-derived fuels, pelletized biomass offers enhanced energy density, improved combustion efficiency, and ease of handling and storage. Khaya senegalensis, a fast-growing tree that thrives in suboptimal conditions, requires regular pruning, leading to significant biomass waste. This study examines the influence of feedstock particle size on the mechanical properties of Khaya senegalensis fuel pellets. Biomass trimmings from Khaya tree branches were collected, processed into wood chips, and ground into five particle sizes (0.1, 0.3, 0.5, 1, and 2 mm) before pelletization. The pellets were produced under constant moisture content, pressure, temperature, and binder percentage. A one-factor-at-a-time (OFAT) approach was employed, with each process repeated three times to ensure consistency. The mechanical properties analyzed include unit density, durability, axial compressive strength, and diametral compressive strength. Experimental data are analyzed using analysis of variance (ANOVA) to examine correlations between feedstock particle sizes and mechanical properties. This study establishes that particle size plays a crucial role in determining the physical and mechanical properties of Khaya senegalensis wood pellets. The results indicate that finer particles (0.15 mm) contribute to higher unit density and durability, whereas coarser particles (1.00 mm) enhance compressive strength.
Keywords:
Biomass, Khaya senegalensis, energy pellet, feedstock particle size, renewable energyReferences
Simanjuntak, J. P., Tambunan, B. H., & Sihombing, J. L. Potential of Pyrolytic Oil from Plastic Waste as an Alternative Fuel Through Thermal Cracking in Indonesia: A Mini Review to Fill the Gap of the Future Research. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, vol 102, issue 2 (2023) pp. 196-207.
Dey, S., Reang, N. M., Das, P. K., & Deb, M. A comprehensive study on prospects of economy, environment, and efficiency of palm oil biodiesel as a renewable fuel. Journal of cleaner production, vol 286, (2021) p. 124981.
Pampuro, N., Bagagiolo, G., & Cavallo, E. Energy requirements for wood chip compaction and transportation. Fuel, vol 262, (2020) p. 116618.
Lu, D., Tabil, L. G., Wang, D., Wang, G., & Emami, S. Experimental trials to make wheat straw pellets with wood residue and binders. Biomass and Bioenergy, vol 69, (2014) pp. 287-296.
Abedi, A., & Dalai, A. K. Study on the quality of oat hull fuel pellets using bio-additives. Biomass and Bioenergy, vol 106, (2017) pp. 166-175.
Ishii, K., & Furuichi, T. Influence of moisture content, particle size and forming temperature on productivity and quality of rice straw pellets. Waste management, vol 34, issue 12 (2014) pp. 2621-2626.
Zaini, I. N., Novianti, S., Nurdiawati, A., Irhamna, A. R., Aziz, M., & Yoshikawa, K. Investigation of the physical characteristics of washed hydrochar pellets made from empty fruit bunch. Fuel Processing Technology, vol 160, (2017) pp. 109-120.
Rezaei, H., Yazdanpanah, F., Lim, C. J., & Sokhansanj, S. Pelletization properties of refuse-derived fuel-Effects of particle size and moisture content. Fuel Processing Technology, vol 205, (2020) p. 106437.
Chaloupkova, V., Ivanova, T., & Havrland, B. Sieve analysis of biomass: accurate method for determination of particle size distribution. In Proceedings of the 15th International Scientific Conference on Engineering for Rural Development, Jelgava, (2016, May) pp. 25-27.
Ungureanu, N., Vladut, V., Voicu, G., Dinca, M. N., & Zabava, B. S. Influence of biomass moisture content on pellet properties–review. Engineering for rural development, vol 17, (2018) pp. 1876-1883.
Silva, G. J. B., Santana, V. P., & Wójcik, M. Investigation on mechanical and microstructural properties of alkali-activated materials made of wood biomass ash and glass powder. Powder Technology, vol 377, (2021) pp. 900-912.
Das, S., Sarkar, P. K., & Mahapatra, S. Single particle combustion studies of coal/biomass fuel mixtures. Energy, vol 217, (2021)p.119329.
