Vol. 3 No. 2 (2024)

Articles

• Effect of Ball Milling Process on the Characteristics of Natural Based- And Synthetic Based-Wollastonite for Biomedical Application

  Nur Hasnidah Ahmad Shukeri, Syed Nuzul Fadzli

  1-14

  • FULL ARTICLE

  Abstract View: 18, FULL ARTICLE Download: 24 DOI : https://doi.org/10.58915/aset.v3i2.711
  

• Structural Integrity and Elasticity of Banana Fibre Effect of Blast Pressure: Understandings from Strain Test Comparisons Before and After Blast Test

  Abdul Rashid Othman, Ahmad Humaizi Hilmi, Asna Rasyidah Abdul Hamid, Siti Aisyah Azman

  15-29

  • FULL ARTICLE

  Abstract View: 19, FULL ARTICLE Download: 12 DOI : https://doi.org/10.58915/aset.v3i2.1042
  

• Computational Fluid Dynamics Analysis of Under-door Exhaust Duct: Influences of Inlet Diameter and Number of Outlet Holes

  Jun Yuan Phong

  30-41

  • FULL ARTICLE

  Abstract View: 15, FULL ARTICLE Download: 15 DOI : https://doi.org/10.58915/aset.v3i2.1431
  

• Analysis of Aircraft Hydraulic Filter Flow: Computational Fluid Dynamics Simulation Using SimFlow 4.0

  Muhammad Aiman Rahimi Adli

  42-50

  • FULL ARTICLE

  Abstract View: 17, FULL ARTICLE Download: 16 DOI : https://doi.org/10.58915/aset.v3i2.1432
  

• Flow Analysis in Cooling Channels for Graphics Processing Unit (GPU) Block

  Mohd Izzat Aiman Adi

  51-60

  • FULL ARTICLE

  Abstract View: 34, FULL ARTICLE Download: 14 DOI : https://doi.org/10.58915/aset.v3i2.1433
  

• Effect of Inlet-Outlet Diameter on the Water Flow in Gully Trap for Water Drainage System: CFD Analysis

  Muhammad Syafiq Bahanuddin

  61-70

  • FULL ARTICLE

  Abstract View: 24, FULL ARTICLE Download: 18 DOI : https://doi.org/10.58915/aset.v3i2.1434
  

• Influence of Inlet Mass Flow Rates on Fluid Characteristics of Engine Exhaust Manifold

  Vinoth Baskaran

  71-79

  • FULL ARTICLE

  Abstract View: 14, FULL ARTICLE Download: 30 DOI : https://doi.org/10.58915/aset.v3i2.1435
  

• Innovative Design Idea of the Shaft Drilling Jigs and Fixture for Better Machining and Fabrication

  Iznul Azim Ibrahim, Muammar Ramdan Mazlin, Rusli Bashir Ruslin, Mohammad Firdaus Shahabuddin

  80-89

  • FULL ARTICLE

  Abstract View: 12, FULL ARTICLE Download: 22 DOI : https://doi.org/10.58915/aset.v3i2.1436
  

• Innovative Design of Three-Axis Jig for Drilling Enhancement

  Dainty Chen Shu Juan, Muhammad Azri Abdul Lateb, Nur Hazwani Hamzah

  90-101

  • FULL ARTICLE

  Abstract View: 14, FULL ARTICLE Download: 16 DOI : https://doi.org/10.58915/aset.v3i2.1437
  

• Optimization Model for Maximizing Economic Impact of POME Treatment System

  Sivakumar Pallikodathan, Hasfalina Che Man, Tinia Idaty, Alawi Sulaiman; Gunasilan Nagarajoo; Mohamad Firdza Shukery

  102-112

  • FULL ARTICLE

  Abstract View: 19, FULL ARTICLE Download: 9 DOI : https://doi.org/10.58915/aset.v3i2.1205
  

• CFD Simulation of Fluid Flow and Heat Transfer of Internal Cooling Channels for Turning Tool

  Nazmin Ikbar Mohd Piterah, Muhammad Syamil Zakaria

  113-122

  • FULL ARTICLE

  Abstract View: 10, FULL ARTICLE Download: 7 DOI : https://doi.org/10.58915/aset.v3i2.1453
  

• Bioinsecticidal Activity of Roots and Leaves Extract of Cymbopogon citratus on Sitophyluz oryzae

  Nurhadijah Zainalabidin, Muhamad Ikmal Sirozi, Nor Hidawati Elias

  123-132

  • FULL ARTICLE

  Abstract View: 20, FULL ARTICLE Download: 16 DOI : https://doi.org/10.58915/aset.v3i2.1271
  

• Simulation and Experimental Study of Arduino DC Motor Speed Control with PID Controller

  S. I. Samsudin, K. Osman, S. F. Sulaiman, S. I. M. Salim, Nur Izzati Mohd Aliashak

  133-143

  • FULL ARTICLE

  Abstract View: 23, FULL ARTICLE Download: 22 DOI : https://doi.org/10.58915/aset.v3i2.1265
  

• Energy Absorption Characteristics of Thin-Walled Tubes Filled with Rice Husk and Kenaf Fibers

  Masniezam Ahmad, Khairul Azwan Ismail, Fauziah Mat, Mohd Hazwan Mohd Hanid, Ahmad Azraai Abd Aziz

  144-152

  • FULL ARTICLE

  Abstract View: 13, FULL ARTICLE Download: 9 DOI : https://doi.org/10.58915/aset.v3i2.1500