Parametric Investigation of Mechanical Aspect for TV Wall Mount Bracket via Finite Element Analysis
DOI:
https://doi.org/10.58915/aset.v1i2.17Abstract
Nowadays, most flat screen television (TV) come with a feature that allows users to mount the TV and it takes some effort on the user's part to attach the mount to the wall and the TV to the mount. Various TV wall mount designs available on the market with different dimensions, thicknesses, and materials may cause mechanical problems. This study aims to analyze the effect of the design parameters on the wall mounting bracket and evaluate the best design parameters for minimal mechanical defects. The validated 3D model is simulated using SolidWorks software. Different wall mount lengths, widths, thicknesses, and TV wall mount bracket designs are selected as factors in this study. Meanwhile, stress, displacement, and strain are selected as responses in this study. Statistical regression analysis analyzes the correlations between design parameters and mechanical defects. The analysis shows that 6 mm thickness, 430 mm length, and 160 mm width have the lowest stress, strain, and displacement. Design 3 is the best wall plate design to minimize stress and strain. To conclude, the results of this study could make the TV wall mount bracket a universal mounting for various weights of TVs.
References
Pardiwala, A. Wall Mount or on a Stand? What You Need to Know Before Setting Up Your New TV. NDTV Gadgets 360. https://gadgets.ndtv.com/tv/guide/wall-mount-vs-stand-tv-advantages-disadvantages-type-of-wall-mount-2122709, (2019).
Xue, J., Ren, G., Qi, L., Wu, C., & Yuan, Z. Experimental study on lateral performance of glued-laminated timber frame infilled with cross-laminated timber shear walls. Engineering Structures, vol 239, (2021) p.112354. [3] Neelakandan, V., Ganesan, T., & Rao, P. C. Weight Optimization of Housing Bracket for Electrical Starter Motor using FEA. Procedia Structural Integrity, vol 14, (2019) pp.345-353. [4] Hazwan, M. H. M., Farizuan, R. M., Rahman, W., Radhwan, H., Ahmad, S. A. S., Norli, K., ... & Omar, N. FEA: Automatic air freshener dispenser. In AIP Conference Proceedings, vol. 2339, issue 1 (2021) p.020072.
Yunus, M., Ghulman, H. A., Munshi, S. M., Azam, S., Rahman, J. F., Irfan, M., & Asadulla, M. Optimization And Analysis (Failure Mode Effect and Finite Element) Of A Common Dth Dish Antenna Bracket Assembly. IAEME International Journal of Mechanical Engineering and Technology (IJMET) vol 5, issue 10 (2014) pp.28-44. [6] Nawi, M. A. M., Amin, M. R., Kasim, M. S., Izamshah, R., Ishak, M. I., Khor, C. Y., & Syafiq, A. M. The influence of spiral blade distributor on pressure drop in a swirling fluidized bed. In IOP Conference Series: Materials Science and Engineering, vol 551, issue 1 (2019) p.012106. [7] Khor, C. Y., Ishak, M. I., Rosli, M. U., Jamalludin, M. R., Zakaria, M. S., Yamin, A. F. M., ... & Abdullah, M. Z. Influence of material properties on the fluid-structure interaction aspects during molded underfill process. In MATEC web of conferences, vol 97, (2017) p.01059.
Kallio, M. High-strength materials in engineering industry products, Research, Aggregates R&D, Metso: Outotec, (2018). [9] Niesłony, P., Grzesik, W., Chudy, R., & Habrat, W. Meshing strategies in FEM simulation of the machining process. Archives of Civil and Mechanical Engineering, vol 15, issue 1 (2015) pp.62-70.
Al Nageim, H. Structural mechanics: loads, analysis, materials and design of structural elements. Prentice Hall, (2010).
Menaa, L., Bouzid, D. A., & Benouali, A. H. Experimental and Numerical Analysis of a PVC Textile-Sand Confined Structure. Contemporary Engineering Sciences, vol 4, (2009) pp.179-190.
Downloads
Published
Versions
- 2024-05-02 (2)
- 2022-12-29 (1)
