Advanced and Sustainable Technologies (ASET)

About the Journal

Advanced and Sustainable Technologies (ASET) [eISSN: 2976-2294] is a peer-reviewed engineering technology journal with scholarly open-access and published two issues per year (in June and December) by Universiti Malaysia Perlis (UniMAP) Press. ASET is an international journal initiated by the Malaysian Technical University Network. This journal was launched by the Faculty of Mechanical Engineering Technology, UniMAP, in September 2021. ASET focuses on articles that contribute new knowledge and application in Advanced and Sustainable Technology and publishing original research articles. ASET covers all areas of Advanced Applied Mechanics and Electronics (Mechanical and Manufacturing, Electrical and Electronics, Telecommunication and Computer Technologies), Sustainable Infrastructure and Environment (Construction and Infrastructure, Chemical and Biotechnologies, Industrial Safety, and Sustainable Technologies).

Current Issue

Vol. 4 No. 1 (2025)

Published: 2025-06-10

Articles

Quantification of Bioethanol Derived from Selected Renewable Coconut Raw Materials Using Simple Fermentation-Distillation Process

Dharell Siano, Martina Victoria Pascua, Edessa Flordeliz, Mary Jane C. Fetalvero

1-8
- FULL ARTICLE
Abstract View: 53, FULL ARTICLE Download: 37 DOI : https://doi.org/10.58915/aset.v4i1.1554
Effect of Alkaline Treatment on Tensile Properties of Low Density Polyethylene/Bean Sprout Skin Composites

Soo Jin Tan, Kai Loong Foo, Mohammad Firdaus bin Abu Hashim

9-14
- FULL ARTICLE
Abstract View: 38, FULL ARTICLE Download: 26 DOI : https://doi.org/10.58915/aset.v4i1.1541
Enhanced Electrical Properties of Graphite-Doped Titanium Dioxide Thin Films via Sol-Gel Method

Kai Loong Foo, S.J. Tan, C.Y. Heah, Y.M. Liew

15-21
- FULL ARTICLE
Abstract View: 29, FULL ARTICLE Download: 22 DOI : https://doi.org/10.58915/aset.v4i1.1545
Engineering a Better Slice: Development of an Efficient Watermelon Slicing Tool

Mohd Uzair Mohd Rosli, M.S. Zakaria, Masniezam Ahmad, Lim Jit Chao, Ng Chung Kit, Phong Jun Yuan

22-32
- FULL ARTICLE
Abstract View: 27, FULL ARTICLE Download: 18 DOI : https://doi.org/10.58915/aset.v4i1.1540
Design and Development of a Spring-Type Fixture for Manufacturing Efficiency

Mohd Uzair Mohd Rosli, M.S. Zakaria, Masniezam Ahmad, Muhammad Syafiq Bin Bahanuddin, Muhammad Aidan Hakim Bin Mohd Nasir, Wan Ahmad Nayeef Bin Wan Zamri

33-42
- FULL ARTICLE
Abstract View: 31, FULL ARTICLE Download: 37 DOI : https://doi.org/10.58915/aset.v4i1.1539
Enhancing Quality Control in Automotive Reconditioning: A Case Study of Carsome Certified Lab

Muhammad Naufal Aqil Bin Daud, Suhaimi Shahrin, Muhammad Aiman Bin Ahmad Fozi, Muhammad Lutfi Bin Abd. Latif

43-51
- FULL ARTICLE
Abstract View: 34, FULL ARTICLE Download: 25 DOI : https://doi.org/10.58915/aset.v4i1.1597
Strategic Workflow Optimization in Automotive Quality Control: A Case Study of Carsome Certified Lab

Mohammad Adli Nazmi Bin Samsu Bahari, Suhaimi Shahrin, Asmawi Mohd Khailani, Wan Mohd Faizal

52-60
- FULL ARTICLE
Abstract View: 34, FULL ARTICLE Download: 26 DOI : https://doi.org/10.58915/aset.v4i1.1596
Design and Development of Single-Handed Kitchenware for Individuals with Hand Disabilities

Muhammad Ikman Ishak, Muhamad Ikhmal Alif Abdullah, Ahmad Ramli Rashidi, Shahidah Arina Shamsuddin, Normah Kassim, Wan Nur Atiqah Wan Draman, Noor Diyana Dahlan

61-74
- FULL ARTICLE
Abstract View: 40, FULL ARTICLE Download: 26 DOI : https://doi.org/10.58915/aset.v4i1.1649
Building Stronger Biomass: How Particle Size Affects the Physical and Mechanical Properties of Khaya senegalensis Fuel Pellets

Ras Izzati Ismail, Chu Yee Khor, Alina Rahayu Mohamed

75-83
- FULL ARTICLE
Abstract View: 33, FULL ARTICLE Download: 21 DOI : https://doi.org/10.58915/aset.v4i1.1818
Determining the Potential of Layered Banana Fibre Weave Patterns for Enhanced Blast Resistance in Bomb Blankets

Abdul Rashid Othman, Ahmad Humaizi Hilmi, Asna Rasyidah Abdul Hamid, Siti Aisyah Azman

84-96
- FULL ARTICLE
Abstract View: 34, FULL ARTICLE Download: 32 DOI : https://doi.org/10.58915/aset.v4i1.1689
Multi-Objective Optimization of Injection-Molded Car Door Handles Using Taguchi Method and Grey Relational Analysis

Wan Alif Nazmi Wan Muhamat, Nik Mizamzul Mehat, Shahrul Kamaruddin

97-112
- FULL ARTICLE
Abstract View: 18, FULL ARTICLE Download: 28 DOI : https://doi.org/10.58915/aset.v4i1.1911
Effect of Cutting Parameters on Cutting-Edge Quality in Laser Machining of Various Metals

Z. Zakwan, S. Norbahiyah

113-123
- FULL ARTICLE
Abstract View: 31, FULL ARTICLE Download: 25 DOI : https://doi.org/10.58915/aset.v4i1.1741
Investigation of Machinability in Milling of PTFE under Dry and Wet Conditions

Mohamad Akmal Alif Bin Ismail, Muhammad Syamil Zakaria, Mohd Uzair Mohd Rosli, Masniezam Ahmad

124-133
- FULL ARTICLE
Abstract View: 23, FULL ARTICLE Download: 32 DOI : https://doi.org/10.58915/aset.v4i1.1945
A Parametric Study on The Performance of Latent Heat Thermal Energy Storage

Muhammad Haziq Akmal bin Mohd Ridzuan, Mohamad Syafiq A.K, Adel Nasser, M. Ahmad, Mohd Haidezul Jamal bin Ab Hadi, M.N. Misbah, A.S. Abdull Sukor

134-151
- FULL ARTICLE
Abstract View: 24, FULL ARTICLE Download: 24 DOI : https://doi.org/10.58915/aset.v4i1.1947
Improving Work Quality in Painting Between Wall and Ceiling Areas Using a Paint Edger

Wan Nur A’tiqah Wan Draman, Muhammad Amir Anur Hussien, Mohd Sabri Hussin, Mohd Syedi Imran Mohd Dawi, Normah Kassim, Muhammad Ikman Ishak

152-159
- FULL ARTICLE
Abstract View: 13, FULL ARTICLE Download: 18 DOI : https://doi.org/10.58915/aset.v4i1.2107
Synergistic Effects of Biochar, Urea Fertilizer, and Lactic Acid Bacteria on Mitigating Soil Ammonia Volatilization

Siti Nurain binti Nizam, Lee Yit Leng, Siti Nurain binti Nizam, Norawanis Abdul Razak, Nur Lailina Makhtar, Ras Izzati Ismail

160-166
- FULL ARTICLE
Abstract View: 18, FULL ARTICLE Download: 30 DOI : https://doi.org/10.58915/aset.v4i1.2108
Critical Spare Parts Identification and Management of Mechanical Ventilation and Air-Conditioning (MVAC) System in University Campus

Syazatul Nazirah Saroji, Mohd Syafiq Syazwan Mustafa, Nurul Hidayah Roslan, Hilmi Kosnin, Hamzah Harjono, Syamil Ismail, Anuar Pawan

167-181
- FULL ARTICLE
Abstract View: 51, FULL ARTICLE Download: 34 DOI : https://doi.org/10.58915/aset.v4i1.1841
Innovative Design of Knife Sharpener for Improving Sharpening Capabilities

Muhammad Syahmi Akmal Zaini, Siti Maisarah Azami, Mohamed Rafiq Asyraf Rozali

182-194
- FULL ARTICLE
Abstract View: 20, FULL ARTICLE Download: 25 DOI : https://doi.org/10.58915/aset.v4i1.2142
Exploring the Evolution of Artificial Bee Colony Algorithms: Emphasis on Semi-Greedy Strategies

MFMA Hamzas, H Radhwan

195-202
- FULL ARTICLE
Abstract View: 18, FULL ARTICLE Download: 21 DOI : https://doi.org/10.58915/aset.v4i1.2174
Design and Fabrication of Jig and Fixture for Panel Pin Assembly in Power Motor Side Mirror

Vinoth Baskaran, H Radhwan, MFMA Hamzas

203-212
- FULL ARTICLE
Abstract View: 22, FULL ARTICLE Download: 23 DOI : https://doi.org/10.58915/aset.v4i1.2175
Balancing the Popcorn Production Line Using Tecnomatix Plant Simulation

M A Selimin, A N A Ahmad, M S Nazri

213-223
- FULL ARTICLE
Abstract View: 25, FULL ARTICLE Download: 28 DOI : https://doi.org/10.58915/aset.v4i1.2176
Knowledge, Behavior, Awareness, and Policy Towards E-Waste Management Performance Among Malaysian SMEs

Mohd Akhir Ahmad, Muhd Hakimi Razak, Rosman Iteng

224-234
- FULL ARTICLE
Abstract View: 34, FULL ARTICLE Download: 26 DOI : https://doi.org/10.58915/aset.v4i1.2177
The Role of Trust and The Digital Divide: A Moderated Mediation Model for Sustainable E-Government

Nur Ajrun Khalid, Yu Yang

235-249
- FULL ARTICLE
Abstract View: 20, FULL ARTICLE Download: 21 DOI : https://doi.org/10.58915/aset.v4i1.2178
How Do Milk Farmers’ Demographics Affect Their Knowledge of Food Loss in the Milk Supply Chain

Fauzan Romadlon, Wan Nurul Karimah Wan Ahmad, Alina Shamsuddin

250-261
- FULL ARTICLE
Abstract View: 19, FULL ARTICLE Download: 33 DOI : https://doi.org/10.58915/aset.v4i1.2179
Conceptual Framework for Supply Chain Management Strategies and Aviation Ground Maintenance Operations Sustainability: Mediation Role of Supply Chain Management Capabilities

Qusai Makki Ali Ibrahim, Mohammed Akhir Bin Haj Ahmed, Rosini Binti Nawang Mustapen

262-272
- FULL ARTICLE
Abstract View: 22, FULL ARTICLE Download: 17 DOI : https://doi.org/10.58915/aset.v4i1.2180
Marine Parks and Sustainability of Fisheries Resources: View of the Pulau Tioman’s Residents

Rahimi Abidin, Nor Hasni Osman, Fadhilah Mohd Zahari, Alminnourliza Noordin, Suhaila Abdul Hanan, Mohd Nizam Ismail

273-284
- FULL ARTICLE
Abstract View: 16, FULL ARTICLE Download: 23 DOI : https://doi.org/10.58915/aset.v4i1.2218

View All Issues

Advanced and Sustainable Technologies (ASET)

About the Journal

Current Issue

Articles

Quantification of Bioethanol Derived from Selected Renewable Coconut Raw Materials Using Simple Fermentation-Distillation Process

Effect of Alkaline Treatment on Tensile Properties of Low Density Polyethylene/Bean Sprout Skin Composites

Enhanced Electrical Properties of Graphite-Doped Titanium Dioxide Thin Films via Sol-Gel Method

Engineering a Better Slice: Development of an Efficient Watermelon Slicing Tool

Design and Development of a Spring-Type Fixture for Manufacturing Efficiency

Enhancing Quality Control in Automotive Reconditioning: A Case Study of Carsome Certified Lab

Strategic Workflow Optimization in Automotive Quality Control: A Case Study of Carsome Certified Lab

Design and Development of Single-Handed Kitchenware for Individuals with Hand Disabilities

Building Stronger Biomass: How Particle Size Affects the Physical and Mechanical Properties of Khaya senegalensis Fuel Pellets

Determining the Potential of Layered Banana Fibre Weave Patterns for Enhanced Blast Resistance in Bomb Blankets

Multi-Objective Optimization of Injection-Molded Car Door Handles Using Taguchi Method and Grey Relational Analysis

Effect of Cutting Parameters on Cutting-Edge Quality in Laser Machining of Various Metals

Investigation of Machinability in Milling of PTFE under Dry and Wet Conditions

A Parametric Study on The Performance of Latent Heat Thermal Energy Storage

Improving Work Quality in Painting Between Wall and Ceiling Areas Using a Paint Edger

Synergistic Effects of Biochar, Urea Fertilizer, and Lactic Acid Bacteria on Mitigating Soil Ammonia Volatilization

Critical Spare Parts Identification and Management of Mechanical Ventilation and Air-Conditioning (MVAC) System in University Campus

Innovative Design of Knife Sharpener for Improving Sharpening Capabilities

Exploring the Evolution of Artificial Bee Colony Algorithms: Emphasis on Semi-Greedy Strategies

Design and Fabrication of Jig and Fixture for Panel Pin Assembly in Power Motor Side Mirror

Balancing the Popcorn Production Line Using Tecnomatix Plant Simulation

Knowledge, Behavior, Awareness, and Policy Towards E-Waste Management Performance Among Malaysian SMEs

The Role of Trust and The Digital Divide: A Moderated Mediation Model for Sustainable E-Government

How Do Milk Farmers’ Demographics Affect Their Knowledge of Food Loss in the Milk Supply Chain

Conceptual Framework for Supply Chain Management Strategies and Aviation Ground Maintenance Operations Sustainability: Mediation Role of Supply Chain Management Capabilities

Marine Parks and Sustainability of Fisheries Resources: View of the Pulau Tioman’s Residents

Announcements

Information

Make a Submission

eJournal@UniMAP

MyJurnal

Google Scholar

Crossref