Vol. 17 No. December (2024): SPECIAL ISSUE ICOSM 2023

Articles

• Processing of Porous Glass Ceramic using Silica Sand and Industrial Waste for Tiling Application

  Mohd Hakim Ibrahim, Mohd Idham Mustaffar, Anis Nadhirah Ismail, Syarifah Aminah Ismail, Nabihah Othman

  1-6

  • FULL ARTICLE

• Synthesis and Electrical Properties of Fe/Sm Co Doped CeO2

  Nur Fathin Syuhada Samsudin, Salmie Suhana Abdullah, Norzarul Asri Kamis

  7-11

  • FULL ARTICLE

• The Hydrothermal Synthesis of TiO2-GO with Enhance Photocatalytic Activity

  Noor Azira Mohd Noor, Muhammad Asri Idris, Murizam Darus, Nur Farhana Diyana Mohd Yunos

  13-22

  • FULL ARTICLE

• Facile One-pot Green Synthesis of Zinc Oxide Nanoparticle by Using Lemon Peel and Characterization Studies

  Muhammad Faris Dzulkapri, Ainun Rahmahwati Ainuddin, Zakiah Kamdi

  23-29

  • FULL ARTICLE

• Insights of MoO3 HTL in Perovskite Solar Cells from a Simulation Perspective

  Zulfanizam Abdul Wahab, Nabilah Ahmad Jalaludin, Mohd Khanapiah Nor, Ahmad Nizamuddin Muhammad Mustafa, Ahmad Syahiman Mohd Shah, Fauziyah Salehuddin, Faiz Arith

  31-38

  • FULL ARTICLE

• Taguchi Optimization of Wear Properties of Duplex Stainless Steel Reinforced Surface with Silicon Carbide Using TIG Torch Melting

  Lailatul Harina Paijan, Md Abdul Maleque, Zulkifli Mohd Rosli, Mohd Fadzli Abdollah, Mohd Fauzi Mamat, Ahmed Nazrin Md Idriss

  39-45

  • FULL ARTICLE

• Computational Behaviour of Precast Lightweight Concrete Sandwich Panel with Double Shear Truss Connectors Under Flexural Load

  Noridah Mohamad, Mohamad Zulhairi Mohd Bosro, Abdul Aziz Abdul Samad, Wan Inn Goh, Zamri Noranai, Badrul Amin Khairul Faizi, Nor Hayati Abd Ghafar, Norwati Jamaluddin

  47-51

  • FULL ARTICLE

• Characterization of Kapok (Ceiba pentandra (L.) Gaertn.) and Its Reusability in Oil Sorption

  M. Adam Bukhori Hamidon, R. Hussin, Z. Harun, M. Z. Yunos, A. R. Ainuddin, S. M. Rahim, Hamidon. N

  53-59

  • FULL ARTICLE

• Preparation of Linseed Oil-Filled Urea–Formaldehyde Microcapsules and Anti-Corrosion Performance of Self-Healing Epoxy Coatings on Low Carbon Steel Substrate

  Mohd Fauzi Mamat, Muhammad Hairy Muhdar, Nur Nadirah Dollah, Mohammad Rhadhi Kamshah, Mohd Farizul Jaafar, Lailatul Harina Paijan, Mohd Basri Ali, Mohd Hadzley Abu Bakar

  61-70

  • FULL ARTICLE

• Sodium Alginate/Graphene Nanoplatelet Nanocomposites: Effect of Crosslinker and Graphene Nanoplatelet Loading

  Kean Chong Lim, Syarifah Nuraqmar Syed Mahamud, Muhammad Afiq Zikry Badrolhisham

  71-80

  • FULL ARTICLE

• The Potential of Chitosan-Polygonum minus Leaf Mediated Silver-nanoparticles Composite as Green Conductive Biofilm

  Mohd Hanif Mohd Pisal, Jalilah Abd Jalil, Haiza Haroon, Muhammad Nabil Fikri Abd Nasir, Syarifah Nuraqmar Syed Mahamud, Zhi-Fu Lin

  81-87

  • FULL ARTICLE

• Eco-friendly Detergent Powder from Waste Cooking Oil using Cold Process: Characterisation and Comparative Evaluation

  S. S Abdul Rahman , S. A. Ibrahim , R. Hussin, A. R. Ainuddin, Z. Kamdi

  89-93

  • FULL ARTICLE

• Ground Coffee Waste-Derived Activated Carbon: A Sustainable Adsorbent and Photocatalyst for Effective Methylene Blue Dye Degradation

  Or Yang Jai Xien, Siti Norsaffirah Zailan, Norsuria Mahmed, Mohd Natashah Norizan, Ili Salwani Mohamad

  95-101

  • FULL ARTICLE

• Effect of Process Parameters on the Recycled Ageing Polyamide-12 Tensile Strength in Selective Laser Sintering (SLS)

  Irfan Ur Rahman, Norfariza Ab Wahab, Mohd Idain Fahmy Rosley, Lailatul Harina Paijan, Ranjit Singh, Mohd Fauzi Mamat

  103-111

  • FULL ARTICLE

• Preparation & Characterization of Biochar from Rice Husk by Pyrolysis Method

  Faizul Che Pa, Nur Nuha Ulya Norazman, Ruhiyuddin Mohd Zaki

  113-119

  • FULL ARTICLE

• Effect of Moisture Content on the Tensile Properties of Areca Leaf Sheath

  Oi-Ka Jong, Nor Mazlana Main, Azrin Hani Abdul Rashid, Noraini Marsi, Rosniza Hussin, Siti Aida Ibrahim

  121-128

  • FULL ARTICLE

• Temperature Data Acquisition for Material Performance of Instrument Panel (IP) in Automotive Applications

  Lailatul Harina Paijan, Liza Anuar, Mohd Fauzi Mamat

  129-137

  • FULL ARTICLE

• Nitrogen Availability Following Application of Urea and Decanter Cake/Palm Kernel Expeller Frass Produced from Black Soldier Fly Larvae

  Deborah Renting Jimmy, Latifah Omar, Nathaniel Maikol, Rafeah Wahi

  139-146

  • FULL ARTICLE

• Magnetite (Fe3O4)-Activated Carbon Composite from Ground Coffee Waste for the Removal of Copper Ions (Cu2+) from Solution

  Siti Norsaffirah Zailan, Norsuria Mahmed, Nur Mawaddah Juzaini, Mohd Natashah Norizan, Ili Salwani Mohamad, Aissa Bouaissi

  147-153

  • FULL ARTICLE

• Comparative Methods on The Upgrading of Fe Goethite Iron Ore

  Costantine Joannes, Ismail Ibrahim, Tinesha Selvaraj, Roshaida Arbain, Anuar Othman

  155-163

  • FULL ARTICLE

• Isothermal Oxidation Behaviour of Heat-treated Fe-33Ni-19Cr Series Ni-based Superalloy

  Megat Farhan Nazmi Megat Mohamad Halim, Noraziana Parimin, Esah HamzaH

  165-170

  • FULL ARTICLE

• Characterization of Oxidation Kinetics and Oxide Scale Formation on Isothermal Oxidation of HR-120 Ni-based superalloy at 500ºC

  Noraziana Parimin, Esah Hamzah, Astuty Amrin

  171-177

  • FULL ARTICLE

• Effect of ER70s Filler Metal on Mechanical Properties and Corrosion Behaviour of Low Carbon Steel Produced by Gas Metal Arc Welding

  Mohd Fauzi Mamat, Siti Nadirah Mohd Syukor, Mohd Faiz Mohd Bokhadi, Rohah Ab. Majid, Lailatul Harina Paijan, Mohd Basri Ali, Mohd Hadzley Abu Bakar, Mohd Idain Fahmy Rosley

  179-187

  • FULL ARTICLE

• Effect of Primer Layer and Curing Method on Geopolymer Paste Coating Properties

  Farah Farhana Zainal, Jie Xin See, Noraziana Parimin, Nur Farhana Hayazi, Sri Hastuty

  189-195

  • FULL ARTICLE

• Comparative Wetting Study of Sn-0.7Cu Solder on Dimple and Pillar Micro-Texture Fabricated by the Photolithography Technique

  Juyana A Wahab, Mohd Arif Anuar Mohd Salleh, Marliza Mostapha@Zakariaa, Muhammad Firdaus Mohd Nazeri, Nurul Aida Husna Mohd Mahayuddin, Siti Faqihah Roduan

  197-204

  • FULL ARTICLE

• Incoloy 800HT Weldolet Integrity in Hot Collector: Replica Testing Insights

  Nur Farhana Hayazi, Ku Adri Azhan Ku Mohamad, Junaidi Che Halim, Shaiful Rizam Shamsudin

  205-217

  • FULL ARTICLE

• Creep Rupture and Thermal Shock Failures of Nickel-based Alloy Reformer Tubes: A Comparative Analysis

  Nur Farhana Hayazi, Junaidi Che Halim, Ku Adri Azhan Ku Mohamad

  219-234

  • FULL ARTICLE

• Wear Characteristics of 22MnB5 Boron Steels When Applied As Cutting Tool In Dry And Wet Machining Aluminum Alloy

  Mohd Fairuz Mohd Rashid, Mohd Hadzley Abu Bakar, Norfariza Ab Wahab, Mohd Basri Ali, Nor Ana Rosli, Safarudin Gazali Herawan

  235-243

  • FULL ARTICLE

• Improving Cellular Behaviour of Low Modulus Ti-Alloy by Controlling Anodizing Parameter

  Tukur Tsauri Bashir, Zuhailawatia Hussain, Lockman Zainovia, Mohamed Abdel-Hady Gepreel

  245-253

  • FULL ARTICLE

• The Analysis of the Effect of Printing Orientation Parameter on the Surface Roughness of 3D Metal Printed Specimens

  Muhammad Syafiq Syazwan Abu Zaki, Mohd Taufik Taib, Mohd Hadzley Abu Bakar

  255-268

  • FULL ARTICLE

• Corrosion Behaviour of Mild Steel: Insights from Tafel Extrapolation Analysis in Flowing 3.5% NaCl Solutions and Soil with Diverse Resistivity Levels

  Mahalaksmi Gunasilan, Shaiful Rizam Shamsudin, Nursalasawati Rusli, Mohd Rafi Adzman, Wan Mohd Haqqi Wan Ahmad

  269-279

  • FULL ARTICLE

• Comparison of the Corrosion Behaviour of the Re-cast Aluminium 5083 and Its Bulk Alloy

  Zakiah Kamdi, Loo Yuen Hern, Saliza Azlina Osman, Nur Azam Badarulzaman, Tay Sin Kiat

  281-290

  • FULL ARTICLE

• Absorption Ability and Degradable of Thin Film From Orange Peel Waste

  Nor Azwin Ahad, Nur Afiqah Rosli

  291-297

  • FULL ARTICLE

• Influence of Sodium Chloride on Recycled HDPE in Superhydrophobic Surface Development

  Thor Keat Seng, Muhammad Salihin Zakaria, Razif Muhammed Nordin, Khairul Anwar Abdul Halim, Nur Farhana Hayazi, Lokman Hakim Ibrahim

  299-305

  • FULL ARTICLE

• Physical, Mechanical and Thermal Properties of Hybrid Epoxy/ Multi-Walled Carbon Nanotubes/ Silicon Carbide Conductive Nanocomposites

  Nurul Hani Noor Asmadi, Siti Salmi Samsudin, Mohd Shukry Abdul Majid, Mohd Ridzuan Mohd Jamir, Azlin Fazlina Osman

  307-313

  • FULL ARTICLE

• Parametric Studies on Radiation Grafting of Tripropylene Glycol Diacrylate onto Waste Tire Dust

  S. S. M. Shirajuddin, C. T. Ratnam, M. M. A. B. Abdullah

  315-323

  • FULL ARTICLE

• The Effect of Synthesis Parameter On HKUST-1 Nanocomposites Studied by FTIR Characterisation and Mechanical Testing

  Syazwana Ahmad, Mohd Firdaus Omar, E. M. Mahdi, Khairul Anwar Abdul Halim, Shayfull Zamree Abd Rahim, Sam Sung Ting, Hazizan Md Akil, Norlin Nosbi, Nurfina Yudasari, Muhammad Hafiz Hassan

  325-332

  • FULL ARTICLE

• Effect of Solvent on Mechanical and Physical Properties Of PMMA/Sic Composite Films

  Auni Fakhira Che Baharudin, Lim Bee Ying, Voon Chun Hong, Teh Pei Leng, Tan Soo Jin

  333-339

  • FULL ARTICLE

• Effect of Multiple Reflow Cycles and Isothermal Aging on Shear Strength in SAC305/Sn58Bi/Cu-OSP Hybrid Solder Joint

  Muhammad Luqman Mokhtar, Flora Somidin, Mohd Arif Anuar Mohd Salleh

  341-346

  • FULL ARTICLE

• Effect of Graphite Dopant in Polyvinylidene Flouride (PVDF) Electrospun Composites

  Muhammad Zamzuri Mohd Saad, Sharifah Shahnaz Syed Bakar, Shuhaida Yahud, Muhammad Asri Idris, Noorasikin Samat

  347-353

  • FULL ARTICLE